No new engine flashing necessary
Sporty sound
Optimum combination of weight saving, durability and top performance/price ratio
Highest quality workmanship
Laser-engraved logo
Plug & Play mounting

Heat protection is included with slip-on silencer.

Significant increase in safety
Tyre air pressure can be shown on the display
Warns the driver in case of loss of pressure, for example due to a puncture

CNC milled from high-strength aluminum
Elegant anodised surface
Includes drilling for safety wire

790 Duke 18-27
790 Adventure 19-26
890 Duke 21-23
890 Adventure 21-26 990 Duke 24-27
990 RC 26-27
1090 Adventure 17-19
1190 Adventure 13-16
1290 Adventure 17-24
1290 Duke 14-23 On the engine there are two oil drain plugs mounted.

Highest quality workmanship
The right combination of look, style, and performance
Specially designed for the challenges of off-road use
Made from special, high-strength plastic for maximum stability
With exchangeable chain track surface, therefore extremely durable

Made of high-strength aluminum
Tested in complex and specially-developed test cycles
Position markings for easy adjustment

Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

Can only be used with PRO COMPONENTS products.

Sticker is not heat-resistant, but can be used for sticking to the carbon end cap. 47x60 mm

Optimal solution for quick and secure fastening of your smartphone on the vehicle
Get´s mounted with a 3M adhesive pad directly on the back side of a smartphone, or any smartphone case.
New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system
Dimensions: 66x55mm (2.6x2.17 inch).

Recommended articles:
SMARTPHONE BRACKET (A62412992010)
SMARTPHONE ADAPTER (A62412992020)
WIRELESS CHARGING MODULE (00010000424)
WIRELESS CHARGING MODULE (A62412993010)

Silencer housing made of high-grade aluminum
Carbon silencer cap
Mounting also possible with original header
Significantly more torque
Substantial weight saving

Noticeable performance enhancementIn connection with an FMF Megabomb header even further increase in rideability and power output can be achieved.
ATTENTION: When used on MX EU models from MY26 and MX US models from MY26 FACTORY EDITION / MY27 Standard, the air box and air filter must be reverted to MY25. The correct engine mapping must also be installed. Vehicles in this configuration no longer comply with the 109 dB FIM noise limit.

Exceptionally robust
Resistant to the toughest stresses and strains
Easy handling and operation
Elegant design
Extremely torsion-resistant
Extremely durable
Suitable for long-distance travel
Made of high-strength aluminum
Waterproof inner bags included
Proven silicone seal - for a pannier that's dry on the inside, even in the pouring rain

Body made from 1.5 mm thick
Dimensions: 495 mm x 242 mm x 379 mm
Load capacity: 8 kg per side

Adjustable spring preload
Adjustable high-speed compression damping
Adjustable low-speed compression damping
Greater grip and traction
Excellent cooling properties
Consistent performance
Greater comfort
Improved handling
Adjustable low-speed rebound damping

Scope of delivery

Shock absorber incl. 110 N/mm shock spring
Sticker
Ausgleichsbehälterschelle mit Befestigungsmaterial

Enlarged tread area
The adjustability offers the right ergonomics for every rider
For the off-road motorcycles look
Endurance-tested for the toughest off-road applications
Weight-optimised
Tested in complex and specially-developed test cycles
The footpegs are adjustable in 8 positions (in a circle)
Compared to the standard footpeg position, these footpegs can be positioned up to 10mm higher, or 5mm forward or backwards
In addition this footpag can also be slightly tilted (in steps of 15°)
These footpegs are 15mm longer and 3mm wider compared to the standard mounted footpegs
The standard mounted footpeg rubber can also be mounted on these footpegs
The footpeg itself is made out of aluminum and has an anodised surface finish
The footpeg carrier is made out of steel and has an galvanic surface finish

CNC milled from high-strength aluminum
Elegant anodised surface
Integrate perfectly into the vehicle design
Visual highlight
Ball joint, for flexible adjustment of the rear mirror
Including adapter for mounting

CNC milled from high-strength aluminum
Elegant anodised surface

CNC milled from high-strength aluminum
Elegant anodised surface
Extremely light
Visual highlight with technical and ergonomic added value
Adjustable grip width
Flaps removed on ground contact
Prevents broken levers

Required Articles:
FACTORY RACING STEERING DAMPER (58512050100)
STEERING DAMPER BRACKET (79012960100)